Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:
Optoelectronics:
Electronics:

CF1-3800

Adhesives/Sealants,Thermally Conductive

Thermally Conductive Fluorosilicone Elastomer

DESCRIPTION
  • A two-part, thixotropic compound
  • 15:1 Mix Ratio (Part A:B)
  • Provides thermal conductivity when cured
  • Cures at room or temperature or rapidly with heat
APPLICATION
  • Provides heat transfer between electrical/electronic components and heat sinks
  • For use as a sealant, adhesive or molding material requiring solvent resistance
  • Use to adhere covers on housings or where grooves or other configurations require a non-flowable material
  • For applications requiring an operating temperature range of -65°C to 225°C (-85°F to 437°F)
PROPERTIES
Uncured:
Appearance, Part AWhite-
Appearance, Part BTranslucent-
ConsistencyPaste-
Work Time90 min-
Cured: 30 min at 150°C (302°F)
Specific Gravity1.53-
Durometer, Type A50-
Tensile Strength125 psi0.86 MPa
Elongation50%-
Thermal Conductivity30 x 10-4 cal/cm-sec°C1.25 W/m-K

Packaging

100 Gram Kit (0.102 kg)
500 Gram Kit (0.503 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone