Polymer Systems
Technology Limited
PREMIUM CARE SILICONE A CLASS OF ITS OWN
| PRODUCT NUMBER |
DUROMETER TYPE A |
TENSILE psi (MPa) |
ELONGATION % |
TEAR ppi (kN/m) |
STRESS @ STRAIN psi (MPa) @ % |
WORK TIME @ 25°C |
CURE RATE T90m @ 116°C |
SPECIFIC GRAVITY |
|---|---|---|---|---|---|---|---|---|
| MED-4014 | 15 | 700 (4.8) | 1,330 | 155 (27.3) | 40 (0.28) @ 200 | > 25 h | 2.50 | 1.08 |
| MED-4020 | 25 | 1,400 (9.7) | 1,245 | 190 (33.5) | 75 (0.52) @ 200 | > 10 h | 2.30 | 1.10 |
| MED-4025 | 30 | 1,285 (8.9) | 890 | 130 (22.9) | 105 (0.7) @ 200 | 1.5 h | 2.80 | 1.11 |
| MED-4035 | 35 | 1,565 (10.8) | 1,055 | 195 (34.4) | 195 (1.3) @ 200 | 2 h | - | 1.11 |
| MED-4050 | 50 | 1,500 (10.3) | 985 | 265 (46.7) | 305 (2.1) @ 200 | 3.5 h | 2.60 | 1.16 |
| MED-4065 | 65 | 1,250 (8.6) | 1,000 | 265 (46.7) | 355 (2.4) @ 200 | 6 h | 2.65 | 1.20 |
| MED-4080 | 80 | 1,150 (7.9) | 735 | 225 (39.7) | 450 (3.1) @ 200 | 8 h | 2.75 | 1.20 |
| ULTRA HIGH PERFORMANCE | ||||||||
| MED-4027 | 30 | 2,300 (15.9) | 1,050 | 235 (41.2) | 100 (0.69) @ 200 | 2.5 h | - | 1.11 |
| MED-4055 | 55 | 1,655 (10.8) | 880 | 315 (55.6) | 490 (3.4) @ 200 | 2.5 h | 2.85 | 1.14 |
| MED-4070 | 70 | 1,430 (9.9) | 760 | 300 (52.9) | 595 (41) @ 200 | 2 h | 2.70 | 1.19 |
| PRODUCT NUMBER |
DUROMETER TYPE A |
TENSILE psi (MPa) |
ELONGATION % |
TEAR ppi (kN/m) |
STRESS @ STRAIN psi (MPa) @ % |
CURE RATE T90 m @ 116°C |
CURE RATE SCORCH m @ 116°C |
SPECIFIC GRAVITY |
|---|---|---|---|---|---|---|---|---|
| MED‑4120 | 30 | 1,300 (9.0) | 980 | 135 (23.8) | 100 (0.7) @ 200 | 2.10 | 0.55 | 1.10 |
| MED‑4135 | 35 | 1,350 (9.3) | 800 | 130 (22.9) | 190 (1.3) @ 200 | 2.10 | 0.55 | 1.10 |
| MED‑4174 | 50 | 1,300 (8.9) | 750 | 225 (39.7) | 325 (2.2) @ 200 | 1.7 | 0.55 | 1.15 |
| MED‑4150 | 50 | 1,400 (9.65) | 750 | 190 (33.5) | 250 (1.72) @ 200 | 1.90 | 0.50 | 1.16 |
| MED4‑4115 | 50 | 1,600 (11.3) | 500 | 100 (17.6) | 400 (2.8) @ 200 | 2.20 | 0.65 | 1.15 |
| MED4‑4116 | 70 | 1,300 (9.0) | 450 | 125 (22.0) | 550 (3.8) @ 200 | 2.05 | 005 | 1.21 |
| PRODUCT NUMBER |
DUROMETER TYPE A |
TENSILE psi (MPa) |
ELONGATION % |
TEAR ppi (kN/m) |
STRESS @ STRAIN psi (MPa) @ % |
WORK TIME @ 25°C |
CURE RATE T90m @ 116°C |
SPECIFIC GRAVITY |
|---|---|---|---|---|---|---|---|---|
| MED‑4032 | 30 | 1,200 (8.3) | 1,100 | 160 (28.2) | 140 (1.0) @ 200 | 8 h | 3.05 | 1.10 |
| MED‑4042 | 40 | 1,475 (10.2) | 1,000 | 160 (28.2) | 230 (1.6) @ 200 | 2 h | 2.45 | 1.11 |
| MED‑4052 | 50 | 1,400 (9.7) | 1,100 | 230 (40.6) | 280 (1.9) @ 200 | 9 h | 2.25 | 1.16 |
| MED‑4062 | 60 | 1,400 (9.7) | 1,000 | 250 (44.1) | 300 (2.1) @ 200 | 11 h | 2.30 | 1.16 |
| MED‑4072 | 70 | 1,100 (7.6) | 875 | 240 (42.3) | 450 (3.1) @ 200 | 4 h | 1.90 | 1.22 |
| MED4‑4082 | 80 | 1,150 (7.9) | 900 | 200 (35.5) | 400 (2.8) @ 200 | 16 h | 2.20 | 1.22 |
 |
Biomaterials
Marking Inks
Two Roll Mill
Tubing
