Polymer Systems
Technology Limited

Life Science

Premium Care:

MED-4055

Ultra High Performance

UHP High Consistency Silicone Elastomer

DESCRIPTION
  • Two-part, ultra high properties silicone elastomer
  • Cures with heat via addition-cure chemistry
  • Has a non-tacky surface and no volatile by-products or peroxide residues
  • Strained through a 400-mesh screen (minimum)
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
  • For applications requiring high physical properties and fatigue and abrasion resistance
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Plasticity, Part A85 mils (2.2 mm)
Plasticity, Part B75 mils (1.9 mm)
Work Time2.5 hours
Cured: 10 minutes at 138°C (280°F)
Specific Gravity1.14
Post-Cured: 4 hours at 177°C (351°F). Stabilize for 24 hours minimum at ambient temperature and humidity.
Durometer, Type A55
Tensile Strength1,655 psi (11.4 MPa)
Elongation880%
Tear Strength315 ppi (55.6 kN/m)
Stress at 200% Strain490 psi (3.4 MPa)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

2 Pound Kit (900 g)
10 Pound Kit (4.54 kg)
50 Pound Kit (22.68 kg)
1,000 Pound Gaylor Kit (453.6 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet
Example HCR Packaging (2 Part)
Example HCR Packaging (2 Part)
 

WARRANTY INFORMATION

The warranty period provided by Polymer systems Technology ltd (hereinafter “PST”) is 12 months from the date of shipment when stored below 40°C in original unopened containers. Unless PST provides a specific written warranty of fitness for a particular use, PST’s sole warranty is that the product will meet PST’s then current specification. PST specifically disclaims all other expressed or implied warranties, including, but not limited to, warranties of merchantability and fitness for use. The exclusive remedy and PST’s sole liability for Packaging Warranty 50 mL Side-by-Side Kit 12 Months 200 mL Side-by-Side Kit 400 ml Side-by-Side Kit 2 Pint Kit (910 g) 2 Gallon Kit (7.28 kg) 10 Gallon Kit (36.4 kg), Inc. All rights reserved. Trademarks are owned by PST or its affiliates unless otherwise noted. breach of warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. PST expressly disclaims any liability for incidental or consequential damages.

 

WARNINGS ABOUT PRODUCT SAFETY

PST believes, to the best of its knowledge, that the information and data contained herein are accurate and reliable. The user is responsible to determine the material’s suitability and safety of use. NuSil Technology cannot know each application’s specific requirements and hereby notifies the user that it has not tested or determined this material’s suitability or safety for use in any application. The user is responsible to adequately test and determine the safety and suitability for their application and NuSil Technology makes no warranty concerning fitness for any use or purpose. PST has completed no testing to establish safety of use in any medical application. PST has tested this material only to determine if the product meets the applicable specifications. (Please contact PST for assistance and recommendations when establishing specifications.) When considering the use of PST products in a particular application, review the latest Material Safety Data Sheet and contact PST with any questions about product safety information. Do not use any chemical in a food, drug, cosmetic, or medical application or process until having determined the safety and legality of the use. The user is responsible to meet the requirements of the U.S. Food and Drug Administration (FDA) and any other regulatory agencies. Before handling any other materials mentioned in the text, the user is advised to obtain available product safety information and take the necessary steps to ensure safety of use.

 

PATENT / INTELLECTUAL PROPERTY WARNING

PST disclaims any expressed or implied warranty against the infringement of any domestic or international patent/intellectual property right. PST does not warrant the use or sale of the products described herein will not infringe the claims of any domestic or international patent/intellectual property right covering the product itself, its use in combination with other products, or its use in the operation of any process.

For Use With High Consistency Materials:

VersaSil³

Medical Silicones
Medical Silicones

Hand Operated Roll Mill

Hand Operated Roll Mill
Hand Operated Roll Mill
PST-HR

Basic Desk-top Roll Mill

Basic Small Electric Roll Mill - CE Certification
Basic Small Electric Roll Mill PST­EBR­0

Standard & Pro Roll Mill

Pro desk-top with extra features - PST-EBR-2
Standard PST­EBR­1
Pro PST­EBR­2

Standard & Pro Bench Top

Standard & Pro - Full Access Bench Top Electric Roll Mills
Full Access Bench Top Roll Mills
PST-EBR-3 PST-EBR-4

Mobile Roll Mill

Mobile Floor Standing Vertical Electric Roll Mill
Mobile Floor Standing Vertical Roll Mill PST‑MHR

Adjustable Height Roll Mill

Adjustable Height - Electric Roll Mill
Electric - Adjustable Height Roll Mill
PST-HV

PDF Brochure

Download our detailed PDF Brochure
Download our detailed PDF Brochure