Polymer Systems
Technology Limited

Life Science

Premium Care:

MED-2045

Platinum Care

High Consistency Silicone Elastomer

DESCRIPTION

A three-part system. Part A consists of a platinum-catalyzed high consistency base. Part B is a crosslinker and Part C is an inhibitor.
MED-2045 is solvent-free but can be dispersed utilizing various solvents
Cures with heat via addition-cure chemistry
Has a non-tacky surface and no volatile by-products or peroxide residues
Strained through a 400-mesh screen (minimum)
100: 0.7: 0.16 Mix Ratio (Part A: Part B: Part C)

APPLICATION

For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
When dispersed, can be used to make membranes or cast films

PROPERTIES
Typical Properties	Average Result
Uncured:
Appearance	Translucent
Plasticity	95 mils (2.4 mm)
Cured: 10 minutes at 171°C (340°F)
Specific Gravity	1.16
Post-Cured: 2 hours at 148°C (300°F). Stabilize for 3 hours minimum at ambient temperature and humidity
Durometer, Type A	40
Tensile Strength	1,490 psi (10.3 MPa)
Elongation	790%
Tear Strength	195 ppi (34.4 kN/m)
Stress at 200% Strain	195 psi (1.3 MPa)
Tissue Culture (Cytotoxicity Testing)	Pass
Elemental Analysis of Trace Metals	Pass

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

1 Pound Kit (463 g)
5 Pound Kit (2.305 kg)
25 Pound Kit (11.495 kg)

Warranty

12 Months