Polymer Systems
Technology Limited

Advanced Engineering

Optoelectronics:
Electronics:

CF19-2186

Potting and Encapsulating Elastomers

Medium Cure Rate General Purpose Silicone Elastomer

DESCRIPTION
  • A two-part silicone system
  • Provided in mix and dispense applicators
  • 1:1 Mix Ratio (Part A:B)
APPLICATION
  • For applications requiring a rapid cure and easy application
  • Useful for potting, encapsulating and replicating surfaces and devices
  • Ideal for providing protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust and other contaminants
  • Ideal for molding or use in O-rings, potting connectors, cable harness breakouts, molded high voltage terminals, seals, and gaskets
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Viscosity, Part A85,000 cP (85,000 mPas)
Viscosity, Part B65,000 cP (65,000 mPas)
Work Time15 minutes
Cured: 30 minutes at 150°C (302°F)
Specific Gravity1.11
Durometer, Type A25
Tensile Strength1,100 psi (7.6 MPa)
Elongation600%
Tear Strength80 ppi (14.1 kN/m)

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

50 mL SxS Kit
200 mL SxS Kit
400 mL SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
Example packaging
Example packaging

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone