Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:
Optoelectronics:
Electronics:

CF19-2615

Potting and Encapsulating Elastomers

Optically Clear Potting And Encapsulating Silicone Elastomer

DESCRIPTION
  • Two-part, optically clear, solvent free, low viscosity silicone
  • Cures at room temperature or rapidly with heat
  • Offers good physical and electrical stability across a broad range of temperatures
  • Convenient 1:1 Mix ratio
APPLICATION
  • To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards by potting or encapsulating
  • For photonics applications such as HBLEDs, photo detectors, lasers, discrete optics and flat panel displays that require a 1.41 refractive index
PROPERTIES
Typical PropertiesResultMetric Conv.
Uncured:
AppearanceOptically Clear-
Viscosity, Part A1,300 cP1,300 mPas
Viscosity, Part B800 cP800 Mpas
Work Time4 hours-
Cured: Cured 30 min at 150°C (302°F)
Operating Temperature Range-85 to 465°F-65 to 240°C
Durometer, Type A30-
Tensile Strength120 psi0.9 MPa
Elongation100%-
Refractive Index1.41-
Dielectric Strength500 volts/mil19.7 kV/mm
Volume Resistivity1 x 1015-

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

50 ml SxS Kit
400 ml SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone