Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:

CF2-3521

Molding Elastomer

Fluorosilicone Elastomer

DESCRIPTION
  • Two-part, translucent fluorosilicone elastomer
  • 1:1 Mix Ratio (Part A: B)
  • Cures at room temperature or rapidly with heat
  • 50 mole % fluorosilicone
APPLICATION
  • For applications requiring solvent resistance
  • For molding parts such as O-rings, stoppers, and seals
PROPERTIES
Typical PropertiesResultMetric Conv.
Uncured:
AppearanceTranslucent-
Cured: 30 min at 150°C (302°F)
Operating Temperature Range-85 to 465°F-65 to 240°C
Specific Gravity1.3-
Durometer, Type A35-
Tensile Strength750 psi5.2 Mpa
Elongation325%-

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

50 ml SxS Kit
2 Pint Kit (910 g)
2 Gal Kit (7.28 kg)

Warranty

6 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone