Controlled Volatility Potting and Encapsulating Silicone Elastomer
DESCRIPTION
Two-part, white silicone system
1:1 Mix Ratio (Part A:B)
APPLICATION
For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
Ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, seals and gaskets due to its high tear strength
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance*
White
Viscosity, Part A*
65,000 cP (65,000 mPas)
Viscosity, Part B*
40,000 cP (40,000 mPas)
Cured: 15 minutes at 150°C (302°F)
Specific Gravity
1.1
Durometer, Type A*
30
Tensile Strength*
750 psi (5.2 MPa)
Elongation*
350%
Lap Shear Strength (primed w/ CF1-135)*
450 psi (3.1 MPa)
Collected Volatile Condensable Material (CVCM)*
0.04%
Total Mass Loss (TML)*
0.40%
*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Packaging
50 ml SxS Kit
Warranty
12 Months
Product Profile
Material Safety Data Sheet EU EN
Biomaterials
Biomaterials - Medical Silicones for Healthcare
Advanced Technologies
Space - Aviation Grade Industrial & Engineering Silicones
Tubing
Food, Medical & Industrial Quality Silicone Tubing
Equipment
Mixing Dispensing & Degassing Equipment for Silicone
Product Profile
