Polymer Systems
Technology Limited

Advanced Engineering

Space:

CV1-8151

Gels

Controlled Volatility Silicone Gel

DESCRIPTION
  • Two-part, controlled volatility, clear silicone gel
  • 1: 1 Mix Ratio (Part A: Part B)
APPLICATION
  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • As an embedding or potting compound for environmental protection of electronic assemblies and components in electronic or space applications
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTransparent
Viscosity, Part A16,000 cP (16,000 mPas)
Viscosity, Part B8,500 cP (8,500 mPas)
Volume Resistivity, Part A7 x 1014 ohm cm
Volume Resistivity, Part B3.5 x 1014 ohm cm
Cured: 30 minutes at 150°C (302°F)
Penetration (Labline Penetrometer, 19.5 gram shaft, 1/4th inch foot, 5 seconds)0.4 mm
Collected Volatile Condensable Material (CVCM)0.03%
Total Mass Loss (TML)0.13%

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 Gram Kit
100 Gram Kit
200 Gram Kit
500 Gram Kit
2 Gallon Kit (7.28 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone