Polymer Systems
Technology Limited

Advanced Engineering

Space:

CV16-2500

Adhesives/Sealants

Controlled Volatility Silicone Elastomer

DESCRIPTION
  • Two-part, low viscosity clear RTV silicone
  • Designed for enhanced performance in extreme low and high temperatures
  • 10:1 Mix Ratio (Part A:Part B)
APPLICATION
  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • As an embedding or potting compound for environmental protection of electronic assemblies and components
  • Provides protection from extremes in temperature, humidity, radiation, thermal stress and mechanical stress
  • Low viscosity for applications requiring superior flow
PROPERTIES
Typical PropertiesAverage Result
Uncured:
Appearance*Transparent
Viscosity, Part A*3,600 cP (3,600 mPas)
Work Time2 hours
Cured: 4 hours at 65°C (149°F)
Specific Gravity*1.04
Durometer, Type A*40
Tensile Strength*650 psi (4.5 MPa)
Elongation*100%
Lap Shear Strength* (primed w/CF1-135)200 psi (1.4 MPa)
Refractive Index1.43
Moisture Absorption, % gain after 24 hours at 60°C, 90% R.H0.07%
Coefficient of Linear Expansion
-150° to -115°C 10 um/m/°C
-95°C to 250°C 490 um/m/°C
Collected Volatile Condensable Material (CVCM)*0.01%
Total Mass Loss (TML)*0.05%

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil® for assistance and recommendations in establishing limits for product specifications.

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

37 mL SxS Kit (0.0374 kg)
50 Gram Kit (0.051 kg)
100 Gram Kit (0.101 kg)
500 Gram Kit (0.505 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet
 

WARRANTY INFORMATION

The warranty period provided by Polymer systems Technology ltd (hereinafter “PST”) is 12 months from the date of shipment when stored below 40°C in original unopened containers. Unless PST provides a specific written warranty of fitness for a particular use, PST’s sole warranty is that the product will meet PST’s then current specification. PST specifically disclaims all other expressed or implied warranties, including, but not limited to, warranties of merchantability and fitness for use. The exclusive remedy and PST’s sole liability for Packaging Warranty 50 mL Side-by-Side Kit 12 Months 200 mL Side-by-Side Kit 400 ml Side-by-Side Kit 2 Pint Kit (910 g) 2 Gallon Kit (7.28 kg) 10 Gallon Kit (36.4 kg), Inc. All rights reserved. Trademarks are owned by PST or its affiliates unless otherwise noted. breach of warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. PST expressly disclaims any liability for incidental or consequential damages.

 

WARNINGS ABOUT PRODUCT SAFETY

PST believes, to the best of its knowledge, that the information and data contained herein are accurate and reliable. The user is responsible to determine the material’s suitability and safety of use. NuSil Technology cannot know each application’s specific requirements and hereby notifies the user that it has not tested or determined this material’s suitability or safety for use in any application. The user is responsible to adequately test and determine the safety and suitability for their application and NuSil Technology makes no warranty concerning fitness for any use or purpose. PST has completed no testing to establish safety of use in any medical application. PST has tested this material only to determine if the product meets the applicable specifications. (Please contact PST for assistance and recommendations when establishing specifications.) When considering the use of PST products in a particular application, review the latest Material Safety Data Sheet and contact PST with any questions about product safety information. Do not use any chemical in a food, drug, cosmetic, or medical application or process until having determined the safety and legality of the use. The user is responsible to meet the requirements of the U.S. Food and Drug Administration (FDA) and any other regulatory agencies. Before handling any other materials mentioned in the text, the user is advised to obtain available product safety information and take the necessary steps to ensure safety of use.

 

PATENT / INTELLECTUAL PROPERTY WARNING

PST disclaims any expressed or implied warranty against the infringement of any domestic or international patent/intellectual property right. PST does not warrant the use or sale of the products described herein will not infringe the claims of any domestic or international patent/intellectual property right covering the product itself, its use in combination with other products, or its use in the operation of any process.


Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone