For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
As a sealing, caulking, adhesive or potting material in electronic and space applications where high vacuum environments are encountered
For bonding solar cells to solar array panels
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
Red
Work Time
2 hours
Cured: 7 days minimum at ambient temp. and humidity
Appearance
Red, Elastomer
Specific Gravity
1.5
Durometer, Type A
55
Tensile Strength
900 psi (6.2 MPa)
Elongation
140%
Tear Strength
40 ppi (7.1 kN/m)
Lap Shear Strength (primed w/ SP-121)
625 psi (4.3 MPa)
Collected Volatile Condensable Material (CVCM)
0.02%
Total Mass Loss (TML)
0.52%
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
