Polymer Systems
Technology Limited

Advanced Engineering

Space:

CV2-2644

Adhesives/Sealants

Controlled Volatility Electrically Conductive Silicone

DESCRIPTION

Two-part, tan-colored electrically conductive silicone
20:1 Mix Ratio (Part A:B)

APPLICATION

For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
Use for RFI and EMI shielding in electrical and space applications
Well suited for form-in-place conductive gaskets

PROPERTIES
Typical Properties	Average Result
Uncured:
Appearance	Tan
Work Time	2.5 hours
Cured: 30 minutes at 150°C (302°F)
Specific Gravity	3.04
Durometer, Type A	85
Tensile Strength	500 psi (3.4 MPa)
Elongation	100%
Volume Resistivity	0.004 ohm cm
Collected Volatile Condensable Material (CVCM)	0.01%
Total Mass Loss (TML)	0.02%

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

100 Gram Kit

Warranty

12 Months