Polymer Systems
Technology Limited

Advanced Engineering



Electrically Conductive/Static Dissipative

Static Dissipative Controlled Volatility RTV Silicone

  • Two-part, black, static dissipative silicone that cures at room temperature
  • 1: 1 Mix Ratio (Part A: B)
  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
  • Use for RFI and EMI shielding in electronic and space applications
  • Use to adhere covers onto housings or for any application where grooves and other configurations require a non- flowable to limited flow material
  • For applications requiring a broader operating temperature range
Typical PropertiesAverage Result
Viscosity, Part A10,000 cP (10,000 mPas)
Viscosity, Part B10,000 cP (10,000 mPas)
Tack-Free Time10 hours
Cured: 7 days minimum at ambient temp. and humidity
Specific Gravity1.01
Durometer, Type A25
Tensile Strength70 psi (0.48 MPa)
Volume Resistivity2.2 x 106 ohm cm
Collected Volatile Condensable Material (CVCM)0.04%
Total Mass Loss (TML)0.32%

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.


100 Gram Kit
500 Gram Kit


12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet


Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones


Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing


Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone