Controlled Volatility Potting and Encapsulating Silicone Elastomer
DESCRIPTION
Two-part, white silicone system
Offers low modulus
1:1 Mix Ratio (Part A:B)
APPLICATION
For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
Ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, seals and gaskets due to its high tear strength
For use as a thixotropic adhesive
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
White
Viscosity, Part A
1,300,000 cP (1,300,000 mPas)
Viscosity, Part B
1,000,000 cP (1,000,000 mPas)
Work Time
30 minutes
Tack-Free Time
10 hours
Cured: 30 minutes at 150°C (302°F)
Durometer, Type A
30
Tensile Strength
650 psi (4.5 MPa)
Elongation
400%
Lap Shear Strength (primed w/ CF1-135)
325 psi (2.2 MPa)
Collected Volatile Condensable Material (CVCM)
0.04%
Total Mass Loss (TML)
0.40%
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
