Polymer Systems
Technology Limited

Advanced Engineering

EPM-2410-2

Adhesives

Low Volatility Silicone Adhesive

DESCRIPTION
  • Two-part, platinum cure, black silicone system
  • Designed for enhanced performance in extreme low and high temperatures
  • Offers a high tear strength
  • Convenient 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For applications requiring low volatility and high purity
  • To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards. Ideal for use in potting connectors, molded high-voltage terminals and gaskets due to its high tear strength
  • For use as an adhesive and encapsulant
PROPERTIES
Typical PropertiesAverage Result
Uncured:
Appearance*Black
Viscosity, Part A*65,000 cP (65,000 mPas)
Viscosity, Part B*40,000 cP (40,000 mPas)
Work Time*30 minutes
Tack-Free Time* (at 65°C)5 hours
Cured: 15 minutes at 150°C (302°F)
Durometer, Type A*30
Tensile Strength*750 psi (5.2 MPa)
Elongation*400%
Lap Shear Strength* (primed w/ CF1-135)425 psi (2.9 MPa)
Volatile Content (1 hour at 275°C)0.6%
Ionic Content, Cl< 5 ppm
Ionic Content, K< 1 ppm
Ionic Content, Na< 1 ppm

*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 ml SxS Kit
400 ml SxS Kit
500 Gram Kit

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
For Use With Adhesives/Sealants:

Adhesives Pigments

Pigments
Pigments

Adhesives Inks

Inks
Inks

Adhesives Dispensing

Dispensing Guns
Dispensing Guns

Adhesives Mixing

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing Degassing