Polymer Systems
Technology Limited

Advanced Engineering

Optoelectronics:
Electronics:

EPM-2480

Gels

Dielectric Silicone Gel

DESCRIPTION
  • Two-part, clear silicone gel
  • 1:1 Mix Ratio(Part A: Part B)
APPLICATION
  • For applications requiring low volatility
  • Useful for potting intricate assemblies due to a low viscosity
  • As an embedding or potting compound for environmental protection of electronic assemblies and components
PROPERTIES
Typical PropertiesAverage Result
Uncured:
Appearance*Transparent
Viscosity* (tested within 15 minutes after catalyzation)2,500 cP (2,500 mPas)
Work Time*>30 hours
Cured: 30 minutes at 150°C (302°F)
Penetration* (GCA Penetrometer, 19.5 g shaft, 6.35 mm diameter, 5 seconds)4 mm
Volume Resistivity1 x 1014 ohm cm
Volatile Content (1 hour at 275°C)1.09%
Ionic Content, Cl< 5 ppm
Ionic Content, K<1 ppm
Ionic Content, Na< 2 ppm

*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

14 cc SxS Kit
50 Gram Kit
50 mL SxS Kit
100 Gram Kit
2 Pint Kit (910 g)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone