Offers good physical and electrical stability across a broad range of temperatures
1:1 Mix Ratio (Part A:B)
APPLICATION
To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards by potting or encapsulating
For photonics applications such as HBLEDs, photo detectors, lasers, discrete optics and flat panel displays that require a1.41 refractive index
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance*
Transparent
Viscosity, Part A*
1,200 cP (1,200 mPas)
Viscosity, Part B*
800 cP (800 mPas)
Refractive Index*
1.41
Work Time*
5.5 hours
Volume Resistivity
1 x 1014 ohm cm
Cured: 30 minutes at 150°C (302°F)
Durometer, Type A*
30
Tensile Strength*
120 psi (0.83 MPa)
Elongation*
100%
Dielectric Strength
600 volts/mil (23.6 kV/mm)
Moisture Absorption % gain after 168 hour exposure at 85°C (185°F) / 85% R.H.
0.10%
Ionic Content, Cl
<5 ppm
Ionic Content, K
<5 ppm
Ionic Content, Na
<10 ppm
Glass Transition (Tg)
-112°C
Coefficient of Linear Thermal Expansion (0°C to 150°C)
337 ppm/°C (337µm/m/°C)
*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Packaging
50 ml SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)
Warranty
12 Months
Product Profile
Material Safety Data Sheet EU EN
Biomaterials
Biomaterials - Medical Silicones for Healthcare
Advanced Technologies
Space - Aviation Grade Industrial & Engineering Silicones
Tubing
Food, Medical & Industrial Quality Silicone Tubing
Equipment
Mixing Dispensing & Degassing Equipment for Silicone
Product Profile
