Life Science

Implant Line

MED-1511

Adhesives

Silicone Adhesive

DESCRIPTION
  • One-part, solvent-free silicone
  • Cures at room temperature upon exposure to atmospheric moisture
APPLICATION
  • Well suited for use as an adhesive for bonding and sealing silicone materials
  • For applications requiring the bonding of silicone to metals, urethanes and various other substrates
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Tack-Free Time12 minutes
Cured: 72 hours minimum at ambient temperature and humidity
Specific Gravity1.12
Durometer, Type A25
Tensile Strength1440 psi (9.9 MPa)
Elongation680%
Tear Strength95 ppi (16.7 kN/m)
Stress at 200% Strain130 psi (0.89 MPa)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

100 x 10 CC Syringe
8 Gram Tube
2 Ounce Tube (59 mL)
5 Ounce Tube (148 mL)
6 Ounce Semco® Tube

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet
Example packaging
Example packaging
For Use With Adhesives/Sealants:

Adhesives Pigments

Pigments
Pigments

Adhesives Inks

Inks
Inks

Adhesives Dispensing

Dispensing Guns
Dispensing Guns

Adhesives Mixing

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing Degassing