Life Science

Implant Line

MED-2174

Peroxide Cure

High Consistency Silicone Elastomer

DESCRIPTION

Uncatalyzed high consistency elastomer
Catalyze with various peroxides to form a medium durometer rubber
Strained through a 400-mesh screen (minimum)

APPLICATION

For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding

PROPERTIES
Typical Properties	Average Result
Uncured:
Appearance	Translucent
Plasticity	110 mils (2.78 mm)
Post Cured: 4 hours at 205°C (401°F). Stabilize for 3 hours minimum at ambient temperature and humidity.
Specific Gravity	1.15
Post Cured: 4 hours at 205°C (401°F). Stabilize for 3 hours mini
Durometer, Type A	50
Tensile Strength	1,300 psi ( 8.9 MPa)
Elongation	750%
Tear Strength	225 ppi (39.7 kN/m)
Stress at 200% Strain	325 psi (2.2 MPa)
Tissue Culture (Cytotoxicity Testing)	Pass
Elemental Analysis of Trace Metals	Pass

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

1 Pound (450 g)
5 Pound (2.27 kg)
25 Pound (11.38 kg)

Warranty

12 Months