Two-part, white silicone system used with injection molding equipment
Cures with heat via addition-cure chemistry
Designed to resist blocking on molded parts caused by radiation sterilization
1:1 Mix Ratio (Part A: Part B)
APPLICATION
For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
Suitable for over-molding applications
Can be used with NuSil's Healthcare color masterbatches for applications requiring colored silicones
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
White
Work Time
>72 hours
Cured: 10 minutes at 150°C (302°F)
Specific Gravity
1.17
Durometer, Type A
40
Tensile Strength
850 psi (5.9 MPa)
Elongation
350%
Tear Strength
130 ppi (22.9 kN/m)
Tissue Culture (Cytotoxicity Testing)
Pass
Elemental Analysis of Trace Metals
Pass
These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Packaging
50 mL Side-by-Side Kit
200 mL Side-by-Side Kit
400 mL Side-by-Side Kit
40 Ounce Kit (1.18 L)
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)
2 Drum Kit (360 kg)
Product Profile
