Polymer Systems
Technology Limited

Life Science

Implant Line

MED-6655

Dispersions

RTV Fluorosilicone Dispersion

DESCRIPTION
  • One-part, 100 mol % fluorosilicone, RTV elastomer dispersed in Tert-Butyl Acetate
APPLICATION
  • For dip casting of thin elastomeric films
  • For sealing and bonding applications
  • For applications requiring resistance (low swell/low permeation) to many solvents and oils including dimethyl silicone oils
Important document: PDF Guide to Silicone Dispersions PDF Guide to Silicone Dispersions

NuSil Technology's MED-6655 shall not be considered for use in human implantation for a period of greater than 29 days.

PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceOpaque White
Non-Volatile Content60%
Viscosity700 cP (700 mPas)
Cured: 72 hours at ambient temp. and humidity
AppearanceTranslucent
Durometer, Type A35
Tensile Strength775 psi (5.3 MPa)
Elongation425%
Tear Strength45 ppi (7.9 kN/m)

The properties listed above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

1 Pint (475 g)
1 Gallon (3.64 kg)
5 Gallon (18.2 kg)
Drum (180 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet
Example packaging
Example packaging
 

WARRANTY INFORMATION

The warranty period provided by Polymer systems Technology ltd (hereinafter “PST”) is 12 months from the date of shipment when stored below 40°C in original unopened containers. Unless PST provides a specific written warranty of fitness for a particular use, PST’s sole warranty is that the product will meet PST’s then current specification. PST specifically disclaims all other expressed or implied warranties, including, but not limited to, warranties of merchantability and fitness for use. The exclusive remedy and PST’s sole liability for Packaging Warranty 50 mL Side-by-Side Kit 12 Months 200 mL Side-by-Side Kit 400 ml Side-by-Side Kit 2 Pint Kit (910 g) 2 Gallon Kit (7.28 kg) 10 Gallon Kit (36.4 kg), Inc. All rights reserved. Trademarks are owned by PST or its affiliates unless otherwise noted. breach of warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. PST expressly disclaims any liability for incidental or consequential damages.

 

WARNINGS ABOUT PRODUCT SAFETY

PST believes, to the best of its knowledge, that the information and data contained herein are accurate and reliable. The user is responsible to determine the material’s suitability and safety of use. NuSil Technology cannot know each application’s specific requirements and hereby notifies the user that it has not tested or determined this material’s suitability or safety for use in any application. The user is responsible to adequately test and determine the safety and suitability for their application and NuSil Technology makes no warranty concerning fitness for any use or purpose. PST has completed no testing to establish safety of use in any medical application. PST has tested this material only to determine if the product meets the applicable specifications. (Please contact PST for assistance and recommendations when establishing specifications.) When considering the use of PST products in a particular application, review the latest Material Safety Data Sheet and contact PST with any questions about product safety information. Do not use any chemical in a food, drug, cosmetic, or medical application or process until having determined the safety and legality of the use. The user is responsible to meet the requirements of the U.S. Food and Drug Administration (FDA) and any other regulatory agencies. Before handling any other materials mentioned in the text, the user is advised to obtain available product safety information and take the necessary steps to ensure safety of use.

 

PATENT / INTELLECTUAL PROPERTY WARNING

PST disclaims any expressed or implied warranty against the infringement of any domestic or international patent/intellectual property right. PST does not warrant the use or sale of the products described herein will not infringe the claims of any domestic or international patent/intellectual property right covering the product itself, its use in combination with other products, or its use in the operation of any process.

For Use With Foam Medical Implants:

Biomaterials

Medical Silicones
Medical Silicones for Healthcare

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Semco

Food Medical Industrial Grade Silicone Tubing
Semco Products PDF Catalogue

SpeedMixers™

Laboratory Vacuum Mixer System
Laboratory Vacuum Mixer System