Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:
Electronics:

R-2141

Adhesives

RTV SILICONE ADHESIVE

DESCRIPTION
  • Two Part, Translucent, 1:1 Mix ratio (A:B)
  • Cures at room temperature or rapidly by applying heat in an oven or by a heat gun or lamp
  • Non-slump but is easily dispensed
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • REACh and RoHS compliant
APPLICATION
  • Adhesive for bonding and sealing silicones to each other and other substrates such as metals and plastics
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • Protects electrical components and assemblies against shock, vibration, moisture, dust, chemicals, and other environmental hazards
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Viscosity, Part A70,000 cP
Viscosity, Part B110,000 cP
Work Time1.5 hours
Tack Free Time 4 hours
Flow* 0.3 inches/5 minutes
Cured: 24 hours at ambient temperature and humidity
Specific Gravity1.10
Durometer, Type A 40
Tensile Strength650 psi (4.5 MPa)
Elongation 250%
Dielectric Constant, 100 Hz 2.80
Dielectric Constant, 1 kHz 2.81
Dissipation Factor, 100 Hz 0.0010

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

50 ml SxS Kit
400 ml SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

6 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
Example packaging
Example packaging
For Use With Adhesives/Sealants:

Adhesives Pigments

Pigments
Pigments

Adhesives Inks

Inks
Inks

Adhesives Dispensing

Dispensing Guns
Dispensing Guns

Adhesives Mixing

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing Degassing