Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:
Optoelectronics:
Electronics:

R-2145

Adhesives/Sealants

Extremely Tough High Durometer Fast-Cure Adhesive/Sealant

DESCRIPTION

Two-part, gray silicone adhesive system
Cures at room temperature or rapidly by applying heat in an oven or by a heat gun or lamp
Does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Product available in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
1:1 Mix Ratio (Part A: Part B)

APPLICATION

Adhesive for bonding and sealing silicones to each other and other substrates such as metals and plastics
For rapid production or prototyping due to a rapid cure

PROPERTIES
Typical Properties	Average Result
Uncured:
Appearance, Part A	Black
Appearance, Part B	White
Color, Mixed	Dark Gray
Extrusion Rate, Part A	310 g/min
Extrusion Rate, Part B	280 g/min
Work Time	15 min
Cured: 2 hours at 65°C (149°F)
Specific Gravity	1.17
Durometer, Type A	45
Tensile Strength	1,050 psi (7.2 MPa)
Elongation	400%
Tear Strength	150 ppi (26.5 N/mm)
Stress at 200% Strain	525 psi (3.6 MPa)
Lap Shear, unprimed	145 psi (1.0 MPa)
Lap Shear, primed w/ CF1-135	600 psi (4.1 MPa)
180° Peel, primed w/ CF1-135	70 ppi (12.3 N/mm)
Young's Modulus	300 psi (2.1 MPa)
Dielectric Strength	825 Volts/mil (32.5 kV/mm)

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

50 ml SxS Kit
400 ml SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

6 Months

Product Profile

Material Safety Data Sheet EU EN

Example packaging

Example packaging

Biomaterials

Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food, Medical & Industrial Quality Silicone Tubing

Equipment

Mixing Dispensing & Degassing Equipment for Silicone