Polymer Systems
Technology Limited
Advanced Engineering
Defence:
Commercial Aviation:
Optoelectronics:
Electronics:
R-2160
Adhesives/Sealants,Potting and Encapsulating Elastomers
High Temperature RTV Silicone Adhesive/Sealant
DESCRIPTION
- Two-part, red, pourable silicone system
- 10:1 Mix Ratio (Part A:B)
- Cures at room temperature or rapidly with heat
- High tear strength and good physical properties
APPLICATION
- As a high temperature adhesive / sealant
- Ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals, seals and gaskets due to its high physical strength
- For applications requiring an operating temperature range of -65°C to 315°C (-85°F to 600°F)
| Typical Properties | Average Result | Metric Conv. |
| Uncured: | ||
| Appearance, Part A | Red | - |
| Appearance, Part B | Translucent | - |
| Consistency, Part A | Pours Easily | - |
| Consistency, Part B | Pours Easily | - |
| Viscosity, Part A | 280,000 cP | |
| Viscosity, Part B | 745 cP | |
| Work Time | 1.5 h | - |
| Tack Free Time | 10 h | - |
| Cured: 30 minutes at 150°C (302°F) | ||
| Specific Gravity | 1.2 | - |
| Durometer, Type A | 20 | - |
| Tensile Strength | 750 psi | 5.2 Mpa |
| Elongation | 625% | - |
| Tear Strength | 140 ppi | 26.5 kN/m |
| - |
Recommended Primer CF1-135
Note: Some bonding applications may require the use of a primer.
Packaging
1 Pint Kit (505 g)
1 Gallon Kit (4.04 kg)
5 Gallon Kit (20.2 kg)
Warranty
12 Months
Product Profile
Safety Data Sheet
Biomaterials
Biomaterials - Medical Silicones for Healthcare
Advanced Technologies
Space - Aviation Grade Industrial & Engineering Silicones
Tubing
Food, Medical & Industrial Quality Silicone Tubing
Equipment
Mixing Dispensing & Degassing Equipment for Silicone
Biomaterials
Advanced Technologies
Tubing
Equipment