Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:
Optoelectronics:
Electronics:

R-2180

Coatings,Dispersions

Ice Phobic Coating

DESCRIPTION
  • Two-part silicone elastomer dispersed in xylene
  • Two medium viscosity parts blend easily in a convenient 1:1 ratio (Part A:B)
APPLICATION
  • For dip casting and heat-curing of thin elastomeric films
  • For use as a coating to minimize ice adhesion
Important document: PDF Guide to Silicone Dispersions PDF Guide to Silicone Dispersions

PROPERTIES
Typical PropertiesAverage Result
Uncured:
Appearance*Transparent to translucent.
Viscosity*3,075 cP (3,075 mPas)
Non-Volatile Content*20%
Work Time>72 hours
Cured: 30 minutes minimum at ambient temp. and humidity, 45 minutes at 75°C (167°F), and 135 minutes at 150°C (302°F)
(The given ramped cure schedule is suggested to remove solvent prior to elevated temperature cure)
Refractive Index*1.41
Durometer, Type A*40
Tensile Strength*1,700 psi (11.7 MPa)
Elongation*1,050%
Tear Strength*300 ppi (52.9 kN/m)
Stress at 100% Strain*150 psi (1.03 MPa)

*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)
2 Drum Kit (360 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone