Polymer Systems
Technology Limited

Advanced Engineering

Optoelectronics:
Electronics:

R-2182

Coatings,Dispersions

Low Coefficient of Friction Silicone Coating

DESCRIPTION
  • Two-part silicone elastomer dispersed in xylene
  • Cures to a smooth silicone film that decreases the coefficient of friction (CoF) compared to the uncoated silicone and increases abrasion resistance for moving, sliding, and rubbing parts
  • Provides adhesion to silicone substrates that results in a reduction of surface tack
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • To provide a heat-cured, low-friction coating on cured silicone substrates
  • Apply by spraying for best results (dipping may also be utilized)
Important document: PDF Guide to Silicone Dispersions PDF Guide to Silicone Dispersions

PROPERTIES
Typical PropertiesAverage Result
Uncured:
Appearance, Part A*Translucent
Appearance, Part B*Colorless to White
Zahn Cup Viscosity, Cup #2* 13 seconds
Percent Solids, Mixed* 25%
Specific Gravity, Pycnometer0.96
Work Time>24 hours

Cured: 5 minutes minimum at ambient temperature and humidity, then 5 minutes at 150°C (302°F)

*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

100 Gram Kit
2 Pint Kit (675 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone