Two-part, black, electrically conductive RTV silicone
Based on a methyl silicone polymer with a broad temperature range
10:1 Mix Ratio (Base: Curing Agent)
APPLICATION
For RFI and EMI shielding for electrical and space applications
Provides protection from humidity, radiation, thermal stress and mechanical stress
Well suited for formed in place conductive gaskets
Use to adhere covers on housings or where grooves or other configurations require a flowable to limited flow material with a low viscosity
For applications requiring an operating temperature range of -65°C to 200°C (-85°F to 392°F)
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
Black
Work Time
15 hours
Cured: 30 minutes at 150°C (302°F)
Specific Gravity
1.1
Durometer, Type A
60
Tensile Strength
690 psi (4.7 MPa)
Elongation
95%
Tear Strength
40 ppi (7.0 kN/m)
Volume Resistivity
6 ohm cm
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
