Polymer Systems
Technology Limited

Advanced Engineering

Defence:
Commercial Aviation:
Optoelectronics:
Electronics:

R-2930

Adhesives/Sealants,Coatings,Thermally Conductive

Thermally Conductive Silicone

DESCRIPTION
  • Two-part, white, thermally conductive silicone
  • Cure may be heat accelerated
  • 15:1 Mix Ratio (Part A: Part B)
APPLICATION
  • To provide heat transfer between electrical/electronic components and their heat sinks
  • Use to adhere integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material
PROPERTIES
Typical PropertiesAverage ResultMetric Conv.
Uncured:
Chemical ClassificationVMQ-
ColorWhite-
ConsistencyPaste-
Work Time at 25°C (77°F)3 hours-
Cured : (Cured 30 min at 150°C (302°F)
Operating Temperature Range-85 to 465°F–65 to 240°C
Specific Gravity at 25°C (77°F)1.55-
Durometer, Type A80-
Tensile Strength260 psi1.72 Mpa
Elongation, %20-
Thermal Conductivity1.46 W/mk35 x 10-4 cal/cm sec °C
Dielectric Strength880 Volts/mil34.6 kV/mm

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

100 Gram Kit
250 Gram Kit
500 Gram Kit

Warranty

12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone