Polymer Systems
Technology Limited

Advanced Engineering

DESCRIPTION

Two-part, translucent, thixotropic, high tear strength silicone system
Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
Many bonding applications do not require the use of a silicone primer for suitable adhesion
Does not require atmospheric moisture to cure
No curing byproducts such as acetic acid or methyl alcohol
Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
1:1 Mix Ratio (Part A: Part B)

APPLICATION

As adhesives for bonding and sealing silicones to each other and other substrates such as metals and plastics
For rapid production or prototyping due to a rapid cure
For rapid production or prototyping due to a rapid cureor applications requiring an operating temperature range of -65°C to 240°C (-85 to 465°F)

PROPERTIES
Typical Properties	Average Result	Metric Conv.
Uncured:
Appearance	Translucent	-
Viscosity, Part A	83,500 cP	83,500 mPas
Work Time	2 hours	-
Cured: 24 hours at ambient temperature and humidity
Specific Gravity	1.12	-
Durometer, Type A	20	-
Tensile Strength	1,000 psi	6.9 Mpa
Elongation	725%	-
Tear Strength	150 ppi	26.5 KN/m