Class VI Supported High Consistency Silicone Elastomer
DESCRIPTION
A two-part, high consistency elastomer designed for optimal performance in a wide range of applications
Produces a tough, durable, translucent elastomer when thermally cured
Has a non-tacky surface and no volatile byproducts or peroxide residues
Advantages include: lot-to-lot consistency and cost- effectiveness
1:1 Mix Ratio (Part A:B)
APPLICATION
For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
Can be used with NuSil's Healthcare color masterbatches for applications requiring colored silicones
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
Translucent
Work Time
11 hours
Cured: 15 minutes at 165°C (329°F)
Specific Gravity
1.19
Durometer (Type A)
60
Tensile Strength
1,295 psi (8.9 MPa)
Elongation
920%
Tear Strength
255 ppi (44.9 kN/m)
Stress at 200% Strain
380 psi (2.6 MPa)
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Packaging
50 Pound Kit (22.68 kg)
1000 Pound Gaylor (455 kg)
Warranty
12 Months
Product Profile
Material Safety Data Sheet EU EN
Example packaging
For Use With High Consistency Materials:
VersaSil³
Medical Silicones
Hand Operated Roll Mill
Hand Operated Roll Mill PST-HR
Basic Desk-top Roll Mill
Basic Small Electric Roll Mill PSTEBR0
Standard & Pro Roll Mill
Standard PSTEBR1
Pro PSTEBR2
Standard & Pro Bench Top
Full Access Bench Top Roll Mills PST-EBR-3 PST-EBR-4
Product Profile
