For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
Use a sealing, caulking, adhesive or potting material in electronic and space applications where high vacuum environments are encountered
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
White
Viscosity, Base
45,000 cP (45,000 mPas)
Work Time
4 hours
Cured: 7 days minimum at ambient temp. and humidity
Specific Gravity
1.19
Durometer, Type A
45
Tensile Strength
600 psi (4.1 MPa)
Elongation
200%
Collected Volatile Condensable Material (CVCM)
0.03%
Total Mass Loss (TML)
0.36%
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
