For applications requiring low volatility and high purity conformal coating
To provide protection against harsh environments while maintaining good dielectric properties and protection from dust, moisture, vibration and other environmental elements
Acts as a conformal coating on rigid and flexible circuit boards and adheres to a variety of substrates including metals and plastics
Compatible to sensitive electronic components such as connectors and switches
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance*
Translucent
Viscosity
7,400 cP
Tack Free Time
50 minutes
Cured: 7 days minimum @ ambient temperature and humidity
Specific Gravity*
1.01
Durometer, Type A*
16
Tensile Strength*
80 psi (0.55 MPa)
Elongation*
200%
Volatile Content (1 hour at 275°C)*
0.7%
Dielectric Strength*
660 V/mil (25.8 kV/mm)
*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
