Polymer Systems
Technology Limited

Life Science

Premium Care:

MED-4044

Platinum Cure

Low Consistency Silicone Elastomer

DESCRIPTION
  • Two-part, translucent, pourable silicone elastomer
  • Offers high tear strength and excellent physical properties
  • Cures with heat via addition-cure chemistry
  • 10:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Viscosity, Part A130,000 cP (130,000 mPas)
Viscosity, Part B380 cP (380 mPas)
Work Time5 hours
Cured: 5 minutes at 177°C (376°F)
Post-Cured: 1 hour at 150°C (328°F). Stabilize for 3 hours minimum at ambient temperature and humidity.
Specific Gravity1.09
Durometer, Type A40
Tensile Strength875 psi (6.0 MPa)
Elongation360%
Tear Strength150 ppi (26.5 kN/m)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

37 mL Side-by-Side Kit
250 mL Side-by-Side Kit
490 mL Side-by-Side Kit
1 Pint Kit (505 g)
1 Gallon Kit (4.04 kg)
5 Gallon Kit (20.2 kg)
Drum Kit (198.5 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
Example packaging
Example packaging

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone