Polymer Systems
Technology Limited

Life Science

Premium Care:


Platinum Cure

Ultra-Soft Low Consistency Silicone Elastomer

  • A very soft two-part, low viscosity, silicone elastomer
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
Typical PropertiesAverage Result
Viscosity, Part A8,300 cP (8,300 mPas)
Viscosity, Part B4,600 cP (4,600 mPas)
Work Time18 hours
Cured: 45 minutes at 150°C (302°F)
Durometer, Type 00055
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Recommended Primer MED1-161

Note: Some bonding applications may require the use of a primer.


50 mL Side-by-Side Kit
400 mL Side-by-Side Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)


12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
Example packaging
Example packaging


Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones


Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing


Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone