Polymer Systems
Technology Limited

Life Science

Implant Line

MED-4244

Low Consistency Elastomers

Low Consistency Silicone Elastomer

DESCRIPTION
  • Two-part, translucent, pourable silicone elastomer
  • Cures with heat via addition-cure chemistry
  • 10:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Viscosity, Part A130,000 cP (130,000 mPas)
Viscosity, Part B360 cP (360 mPas)
Work Time4 hours
Cured: 3 minutes at 177°C (376°F)30
Post-Cured: 1 hour at 150°C (328°C)
Specific Gravity1.1
Durometer, Type A40
Tensile Strength865 psi (6.0 MPa)
Elongation350%
Tear Strength150 ppi (26.4 kN/m)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

37 mL Side-by-Side Kit
250 mL Side-by-Side Kit
490 mL Side-by-Side Kit
1 Pint Kit (505 g)
1 Gallon Kit (4.04 kg)
5 Gallon Kit (20.2 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet
Example packaging
Example packaging
For Use With Low Viscosity Elastomers Medical Implants:

Biomaterials

Medical Silicones
Medical Silicones for Healthcare

SpeedMixers™

Laboratory Vacuum Mixer System
Laboratory Vacuum Mixer System

Marking Inks

Inks
Inks

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing