Polymer Systems
Technology Limited

Life Science

Premium Care:

MED-4901

Liquid Silicone Rubbers

Liquid Silicone Rubber

DESCRIPTION
  • Two-part, translucent silicone system designed for use with injection molding equipment
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For the injection molding of parts requiring a material with a very low durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
  • Suitable for over-molding applications
  • Can be used with NuSil's Healthcare color masterbatches for applications requiring colored silicones
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTranslucent
Work Time25 hours
Cured: 5 minutes at 150°C (302°F).
Specific Gravity1.1
Durometer, Type 0040
Tensile Strength285 psi (2.0 MPa)
Elongation1135%
Tear Strength55 ppi (9.7 kN/m)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 mL Side-by-Side Kit
200 mL Side-by-Side Kit
400 mL Side-by-Side Kit
2 Pint (910 g)
40 Ounce Kit (1.18 L)
2 Gallon (7.28 kg)
10 Gallon (36.4 kg)
2 Drum Kit (360 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
Example LSR Packaging 1:1 Mix Ratio
Example LSR Packaging 1:1 Mix Ratio
For Use With Liquid Silicone Rubbers:

Pigments

Pigments
Pigments

Marking Inks

Inks
Inks

Dispensing Guns

Dispensing Guns
Dispensing Guns

Mixing Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing and Dispensing