Polymer Systems
Technology Limited

Life Science

Implant Line

MED-6210

Low Consistency Elastomers

Optically Clear Low Consistency Silicone Elastomer

DESCRIPTION

Optically clear, two-component silicone elastomer
Cures with heat via addition-cure chemistry
1:1 Mix Ratio (Part A: Part B)

APPLICATION

For use in potting, encapsulating, coating, and injection or transfer molding applications

PROPERTIES
Typical Properties	Average Result
Uncured:
Appearance	Translucent
Viscosity, Part A	19,000 cP (19,000 mPas)
Viscosity, Part B	13,000 cP (13,000 mPas)
Work Time	4 hours
Refractive Index	1.43
Cured: 30 minutes at 150°C (302°F)
Specific Gravity	1.05
Durometer, Type A	50
Tensile Strength	930 psi (6.4 MPa)
Elongation	140%
Tear Strength	35 ppi (6.1 kN/m)
Tissue Culture (Cytotoxicity Testing)	Pass
Elemental Analysis of Trace Metals	Pass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 mL Side-by-Side Kit
400 mL Side-by-Side Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

12 Months