Life Science

Implant Line

MED-6219

Low Consistency Elastomers

Clear High Durometer Low Consistency Silicone Elastomer

DESCRIPTION
  • Flowable, two-part, clear, high durometer silicone
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
  • Useful in any application requiring a clear, flowable, high durometer material
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTransparent
Viscosity, Part A28,000 cP (28,000 mPas)
Viscosity, Part B23,000 cP (23,000 mPas)
Work Time2.5 hours
Cured: 2 hours at 50°C (122°F)
Specific Gravity1.07
Durometer, Type A75
Tensile Strength1,300 psi (9.0 MPa)
Elongation65%
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 mL Side-by-Side Kit
400 mL Side-by-Side Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)
2 Drum Kit (360 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet
Example packaging
Example packaging
For Use With Low Viscosity Elastomers Medical Implants:

Biomaterials

Medical Silicones
Medical Silicones for Healthcare

SpeedMixers™

Laboratory Vacuum Mixer System
Laboratory Vacuum Mixer System

Marking Inks

Inks
Inks

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing