Polymer Systems
Technology Limited

Life Science

Premium Care:

MED-6613-1

Inks

Silicone Ink (WHITE)

DESCRIPTION
  • Strong adhesion to other silicones
  • Dispersed in Xylene
  • Accelerated cure with introduction of heat
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • Ideal for use as a marking ink for silicone parts and other components on which the coating must maintain long-term stability
  • Use in applications requiring a rapid cure schedule
  • Provides high opacity for single print applications
Please Note: Colours displayed are examples only
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceWhite
Non-Volatile Content, Part A65%
Non-Volatile Content, Part B65%
Cured: 5 minutes at 150°C (302°F)
Tissue Culture (Cytotoxicity Testing)Pass

The properties listed above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 Gram Kit
2 Pint Kit (0.91 kg)
2 Gallon Kit (7.28 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet
Example packaging
Example packaging

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone