Polymer Systems
Technology Limited

Life Science

Implant Line



Low Coefficient of Friction Silicone Dispersion

  • Two-part silicone elastomer dispersed in xylene
  • Cures to a smooth silicone film that decreases the coefficient of friction (CoF) compared to the uncoated silicone and increases abrasion resistance
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
  • Suitable for dip casting and heat-curing of thin elastomeric films
  • Low viscosity makes dispersions ideal for use as sprayable coatings
  • To provide a heat-cured, low-friction coating on cured silicone substrates
  • For tubing (ID/OD). Balloons, valves, stoppers, o-rings, and for moving or sliding parts
Important document: PDF Guide to Silicone Dispersions PDF Guide to Silicone Dispersions

Typical PropertiesAverage Result
Appearance, Part ATranslucent
Appearance, Part BTranslucent to Opaque
Zahn Cup Viscosity, Cup #216 seconds
Percent Solids, Mixed25%
Cured: 5 minutes minimum at ambient temperature and humidity, then 5 minutes at 150°C (302°F)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

The properties listed above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Recommended Primer MED1-161

Note: Some bonding applications may require the use of a primer.


100 Gram Kit (0.1 kg)
2 Pint Kit (675 kg)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)


12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet
Example packaging
Example packaging
For Use With Foam Medical Implants:


Medical Silicones
Medical Silicones for Healthcare


Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing


Food Medical Industrial Grade Silicone Tubing
Semco Products PDF Catalogue


Laboratory Vacuum Mixer System
Laboratory Vacuum Mixer System