Life Science

Implant Line

MED-6820

Low Consistency Elastomers

Optically Clear Low Consistency Silicone Elastomer

DESCRIPTION
  • Two-part, pourable, optically clear, silicone elastomer
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
PROPERTIES
Typical PropertiesAverage Result
Uncured:
AppearanceTransparent
Viscosity, Part A78,000 cP (78,000 mPas)
Viscosity, Part B54,000 cP (54,000 mPas)
Work Time4.5 hours
Cured: 30 minutes at 150°C (302°F)
Durometer, Type A40
Tensile Strength670 psi (4.6 MPa)
Elongation210%
Tear Strength40 ppi (7.6 kN/m)
Refractive Index1.436
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

The properties listed above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Packaging

50 mL Side-by-Side Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Saftey Data Sheet EU EN Material Saftey Data Sheet
Example packaging
Example packaging
For Use With Low Viscosity Elastomers Medical Implants:

Biomaterials

Medical Silicones
Medical Silicones for Healthcare

SpeedMixers™

Laboratory Vacuum Mixer System
Laboratory Vacuum Mixer System

Marking Inks

Inks
Inks

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing