Polymer Systems
Technology Limited

Life Science

Premium Care:


RFI and EMI Shielding Silicone Elastomer

  • Two- part, black, static dissipative silicone
  • Cures with heat via addition-cure chemistry
  • 10:1 Mix Ratio (Part A: Part B)
  • For the injection molding of parts requiring a static dissipative material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves.
  • o-rings and other precision parts
  • Suitable for over-molding applications

NuSil Technology's MED10-4260 shall not be considered for use in human implantation for a period of greater than 29 days

Typical PropertiesAverage Result
Work Time 15 hours
Cured: 30 minutes at 150°C (302°F)
Specific Gravity 1.10
Durometer, Type A 60
Tensile Strength 690 psi (4.7 MPa)
Elongation 95%
Tear Strength 40 ppi (7.0kN/m)
Volume Resistivity 6 ohm·cm
Tissue Culture (Cytotoxicity Testing)Pass

These properties tested on a lot-to-lot basis. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Recommended Primer MED1-161

Note: Some bonding applications may require the use of a primer.


1 Pint Kit (505 g)
1 Gallon Kit (4.04 kg)
5 Gallon Kit (20.2 kg)


12 Months

Product Profile - Full Details Product Profile
Safety Data Sheet Material Safety Data Sheet


Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones


Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing


Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone