Polymer Systems
Technology Limited

Life Science

Premium Care:


Platinum Cure

Fast Cure Low Consistency Silicone Elastomer

  • A two-part, translucent silicone elastomer system
  • Cures rapidly at room temperature
  • Platinum addition cure
  • 1:1 Mix Ratio (Part A: Part B)
  • For use in potting, encapsulating, coating, and injection ortransfer molding applications
  • For applications requiring very rapid cure elastomer
Additional information for Fast-Cure Silicones for Short-Term Implants: Fast-Cure Silicones for Short-Term Implants PDF Healthcare PDF tear sheet
Typical PropertiesAverage Result
Viscosity, Part A22,000 cP (22,000 mPas)
Viscosity, Part B17,000 cP (17,000 mPas)
Work Time3 minutes
Cured: 15 minutes at 150°C (302°F)
Specific Gravity1.07
Durometer, Type A20
Tensile Strength585 psi (4.4 MPa)
Tissue Culture (Cytotoxicity Testing)Pass
Elemental Analysis of Trace MetalsPass

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Recommended Primer MED1-161

Note: Some bonding applications may require the use of a primer.


50 mL Side-by-Side Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)


12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet
Example packaging
Example packaging


Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones


Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing


Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone