Polymer Systems
Technology Limited
Advanced Engineering
Defence:
Commercial Aviation:
Optoelectronics:
Electronics:
R-3930
Coatings
RTV Fluorosilicone Dispersion
DESCRIPTION
- One-part RTV silicone elastomer dispersed in tert butyl acetate
- 100 mole % fluorosilicone
APPLICATION
- For coating, sealing and bonding applications requiring solvent and/or fuel resistance
- Designed for spraying, dip casting, and RTV curing of thin, elastomeric films
- For use as a coating to minimize ice adhesion
- Bonds aggressively to most surfaces
- Slight addition of heat will accelerate cure
Important document: 
PDF Guide to Silicone Dispersions
| Typical Properties | Average Result |
| Uncured: | |
| Appearance | Translucent |
| Viscosity | 735 cP (735 mPas) |
| Non-Volatile Content | 60% |
| Cured: 72 hours at ambient temp. and humidity | |
| Specific Gravity | 1.36 |
| Durometer, Type A | 30 |
| Tensile Strength | 750 psi (5.2 MPa) |
| Elongation | 400% |
| Tear Strength | 40 ppi (7.1 kN/m) |
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Recommended Primer SP-120 or SP-121
Note: Some bonding applications may require the use of a primer.
Packaging
1 Pint (475 g)
1 Quart (910 g)
1 Gallon (3.64 kg)
Warranty
12 Months
Product Profile
Material Safety Data Sheet EU EN
Biomaterials
Biomaterials - Medical Silicones for Healthcare
Advanced Technologies
Space - Aviation Grade Industrial & Engineering Silicones
Tubing
Food, Medical & Industrial Quality Silicone Tubing
Equipment
Mixing Dispensing & Degassing Equipment for Silicone
Biomaterials
Advanced Technologies
Tubing
Equipment