Polymer Systems
Technology Limited

Advanced Engineering

Optoelectronics:
Electronics:

CF3-3521

Molding Elastomer

Liquid Injection Molding Fluorosilicone Elastomer

DESCRIPTION
  • Two-part, translucent fluorosilicone elastomer used with liquid injection molding equipment
  • 1:1 Mix Ratio (Part A:B)
  • Cures at room temperature or rapidly with heat
  • 50 mole % fluorosilicone
APPLICATION
  • For applications requiring a medium hardness silicone and solvent resistance
  • Some typical applications include O-rings, gaskets, seals, and precision molded parts
  • Excellent for molding high quality parts at rapid rates
  • For applications requiring an operating temperature range of -65 to 240°C (-85 to 465°F)
PROPERTIES
Typical PropertiesResultMetric Conv.
Uncured:
AppearanceTranslucent-
Work Time12 hours-
Extrusion Rate, Part A*90 g/min-
Extrusion Rate, Part B*150 g/min-
Cured: 30 min at 150°C (302°F)
Specific Gravity1.26-
Durometer, Type A30-
Tensile Strength700 psi4.8 MPa
Elongation360%-

*Performed using a SEMCO® 440 nozzle with an 1/8" orifice and 90 ±5 psi air pressure

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

6 oz Foil Barrier Kit (120 g)
12 Ounce Kit (355 mL)
400 mL SxS Kit
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone