Typical Properties | Average Result |
Uncured: | |
Appearance* | Tan to gray paste |
Viscosity, Base* | 16,000 cP (16,000 mPas) |
Work Time* | 6 hours |
Tack-Free Time* | 6 hours |
Cured: 7 days minimum at ambient temp. and humidity | |
Specific Gravity* | 2.27 |
Durometer, Type A* | 40 |
Tensile Strength* | 175 psi (1.2 MPa) |
Elongation* | 130% |
Lap Shear Strength* (primed w/ SP-120) | 100 psi (0.69 MPa) |
Volume Resistivity | 4,000,000 ohm cm |
Thermal Conductivity* | 0.547 W/(mK)(13 x 10-4 cal/(cm sec°C)) |
Coefficient of Linear Thermal Expansion | |
Below Tg (-150°C to -115°C) | 75 ppm/°C (75µm/m/°C) |
Above Tg (-95°C to 250°C) | 445 ppm/°C (445µm/m/°C) |
Collected Volatile Condensable Material (CVCM)* | 0.03% |
Total Mass Loss (TML)* | 0.21% |
*Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Packaging
100 Gram Kit
500 Gram Kit
Warranty
6 Months