Two-part, controlled volatility, clear silicone gel
1:1 Mix Ratio (Part A:Part B)
Designed for enhanced performance in extreme low and high temperatures
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%
APPLICATION
For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
Useful for potting intricate assemblies due to a low viscosity
As an embedding or potting compound for environmental protection of electronic assemblies and components in electronic or space applications
For applications requiring a broader operating temperature range
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
Transparent
Viscosity, tested within 15 minutes after catalyzation
1,800 cP (1,800 mPas)
Work Time
24 hours
Cured: 40 minutes at 150°C (302°F)
Penetration (GCA Penetrometer, 19.5 g shaft, 6.35 mm diameter, 5 seconds)
3 mm
Collected Volatile Condensable Material (CVCM)
0.05%
Total Mass Loss (TML)
0.15%
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Product Profile
