Easy mixing two-component, medium viscosity system
1:1 Mix Ratio (Part A:B)
APPLICATION
Ideal for casting, calendering, backfilling and dampening
Suitable for applications requiring a clear, tacky, firm silicone gel
Consider for the use as the tacky substrate for removable tapes.
PROPERTIES
Typical Properties
Average Result
Uncured:
Appearance
Translucent
Viscosity, Part A
10,500 cP (10,500 mPas)
Viscosity, Part B
6,500 cP (6,500 mPas)
Viscosity, 2 hours after mixing
12,000 cP maximum
Cured: 45 minutes at 135°C (275°F)
Penetration‡
1.1 mm
Surface-Tack Test
10 psi (0.07 mPa)
Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
‡(Lab Line Penetrometer, 19.5g shaft, ¼" diameter foot, 5 seconds)
Packaging
2 Pint Kit (910 g)
2 Gallon Kit (7.28 kg)
10 Gallon Kit (36.4 kg)
2 Drum Kit (360 kg)
Warranty
12 Months
Product Profile
Safety Data Sheet
Example packaging
Biomaterials
Biomaterials - Medical Silicones for Healthcare
Advanced Technologies
Space - Aviation Grade Industrial & Engineering Silicones
Tubing
Food, Medical & Industrial Quality Silicone Tubing
Equipment
Mixing Dispensing & Degassing Equipment for Silicone
Product Profile
