Polymer Systems
Technology Limited

Life Science

Implant Line

MED-6629

Dispersions

Addition Cure Silicone Dispersion

DESCRIPTION
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
APPLICATION
  • Suitable for dip casting and heat-curing of thin elastomeric films
  • Low viscosity makes dispersions ideal for use as sprayable coatings
Important document: PDF Guide to Silicone Dispersions PDF Guide to Silicone Dispersions
PROPERTY AVERAGE RESULT
Appearance Transparent to Translucent
Non-Volatile Content 33 %
Viscosity 400 cP< (400 mPas)
Cured 75 minutes at 50 °C, 60 minutes at150 °C
Durometer Type A 35
Tensile Strength 1,800 psi (12.4 MPa)
Refractive Index 1.46
Elongation 900 %
Stress at 300 % Strain 305 psi
Tear Strength 310 ppi (2.1 MPa)
Tissue Culture (Cytotoxicity Testing) Pass
Elemental Analysis of Trace Metals Pass
   

Recommended Primer MED1-161

Note: Some bonding applications may require the use of a primer.

Packaging

2 Pint Kit (910 g)
2 Gallon Kit (6.8 kg)
10 Gallon Kit (34 kg)
2 Drum Kit (360 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone