Polymer Systems
Technology Limited

Advanced Engineering

Optoelectronics:
Electronics:

R-2615

Potting and Encapsulating Elastomers

Optically Clear Potting and Encapsulating Silicone Elastomer

DESCRIPTION
  • Two-part, optically clear, solvent free, low viscosity silicone
  • Cures at room temperature or rapidly with heat
  • Offers good physical and electrical stability across a broad range of temperatures
  • 10:1 Mix Ratio (Part A:Part B)
APPLICATION
  • To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards by potting or encapsulating
  • For photonics applications
  • For applications requiring an operating temperature range of -65 to 240°C (-85 to 465°F)
PROPERTIES
Typical PropertiesAverage ResultMetric Conv.
Uncured:
AppearanceTransparent-
Viscosity, Part A6,000 cP6,000 mPas
Viscosity, Part B90 cP90 mPas
Viscosity, Part A and B Mixed 5,300 cP5,300 mPas
Work Time4 hours-
Cured : 15 min at 150°C (302°F)
Specific Gravity1.03-
Durometer, Type A50-
Tensile Strength1,300 psi9.0 MPa
Elongation100%-
Tear Strength20 ppi3.5 kN/m
Refractive Index1.41-
Dielectric Strength500 volts/mil19.7 kV/mm
Volume Resistivity1 x 1015-

Recommended Primer CF1-135

Note: Some bonding applications may require the use of a primer.

Packaging

37 ml Kit (37.4 g)
1 Pint Kit (505 g)
1 Gallon Kit (4.04 kg)
5 Gallon Kit (20.2 kg)

Warranty

12 Months

Product Profile - Full Details Product Profile
Material Safety Data Sheet EU EN Material Safety Data Sheet

Biomaterials

Medical Silicones
Biomaterials - Medical Silicones for Healthcare

Advanced Technologies

Advanced Technologies Industrial & Engineering Silicones
Space - Aviation Grade Industrial & Engineering Silicones

Tubing

Food Medical Industrial Grade Silicone Tubing
Food, Medical & Industrial Quality Silicone Tubing

Equipment

Silicone Mixing Dispensing Degassing Equipment
Mixing Dispensing & Degassing Equipment for Silicone